149 results for Farm and Agriculture Motors

Farm and Agriculture Motors

61 - 80 of 149

Key Features


  • High torque designs
  • Epoxy painted for corrosion protection
  • Double sealed ball bearings
  • Drain holes provided to purge condensation

Check Inventory


Key Features


  • Rolled steel construction
  • Oversized sealed bearings
  • 50 degree C ambient temperature
  • Grease fitting with relief
  • Epoxy paint
  • Double sealed ball bearings
  • 1" longer shaft than NEMA

Check Inventory


Key Features


  • Rolled steel construction
  • Oversized sealed bearings
  • 50 degree C ambient temperature
  • Grease fitting with relief
  • Epoxy paint
  • Double sealed ball bearings
  • 1" longer shaft than NEMA

Check Inventory


Key Features


  • Gasketed capacitor cases and conduit box covers
  • Meets or exceeds NEMA service factors
  • Double sealed ball bearings
  • Single phase designs
  • Condensate drains on general purpose Ag motors
  • Low temperature manual overload protected
  • High starting torque ratings

Check Inventory


Key Features


  • Gasketed capacitor cases and conduit box covers
  • Meets or exceeds NEMA ® service factors
  • Manual rest overload protection
  • UL recognized component listing and CSA certified

Check Inventory


Key Features


  • Gasketed capacitor cases and conduit box covers
  • Meets or exceeds NEMA ® service factors
  • Manual rest overload protection
  • UL recognized component listing and CSA certified

Check Inventory


Key Features


  • Rolled steel construction
  • Oversized sealed bearings
  • Normally closed thermostat protected
  • 50 degree C ambient temperature
  • Grease fitting with relief
  • Epoxy paint
  • Double sealed ball bearings
  • 1" longer shaft than NEMA

Check Inventory


Key Features


  • Class “F” insulation system
  • Overload protected
  • 34” long leads
  • Motor venting protected against insects and rodents
  • Double sealed ball bearings

Check Inventory


Key Features


  • DPA0 - Drip Proof Air Over IP22,Motor venting protected against insects and rodents, Rolled steel construction
  • Two Nameplates, 1 stamped with MIN AIRFLOW REQUIRED OVER MOTOR IS 600FPM
  • Capacitors shipped loose on 1-phase designs, Gasketed capacitor cases and conduit box covers
  • Meets or exceeds NEMA® service factors
  • 34” long leads
  • Double shielded ball bearings, Keyed shaft with 1/4-20 UNC tapped hole on end
  • Class F Insulation with Class F T-Stats
  • UL recognized component listing and CSA certified

Check Inventory


Key Features


  • High starting torque
  • Removable condensate drain plugs
  • Manual reset thermal protector
  • All parts are corrosion resistant

Check Inventory


Key Features


  • High starting torque
  • Removable condensate drain plugs
  • Manual reset thermal protector
  • All parts are corrosion resistant

Key Features


  • Shaft end mechanically locked on C-face models
  • Shaft slinger
  • Low temperature manual reset thermal protector
  • Condensate drains

Key Features


  • Shaft end mechanically locked on C-face models
  • Shaft slinger
  • Low temperature manual reset thermal protector
  • Condensate drains

Key Features


  • Shaft end mechanically locked on C-face models
  • Shaft slinger
  • Low temperature manual reset thermal protector
  • Condensate drains

Key Features


  • Heavy gauge steel construction

Key Features


  • Double sealed ball bearings
  • Thermostats for thermal overload protection (auto reset protector on Z304)
  • 34” long leads for ease of installation
  • Keyed shafts with 1/4”-20 UNC tapped hole in end
  • Extra nameplate included, loose, for remote mounting

Key Features


  • Gasketed capacitor cases and conduit box covers
  • Meets or exceeds NEMA service factors
  • Double sealed ball bearings
  • Single phase designs
  • Condensate drains on general purpose Ag motors
  • Low temperature manual overload protected
  • High starting torque ratings

Key Features


  • Double sealed ball bearings
  • Manual overload protector

Crop Dryer Motor, 7.50 HP, 1 Ph, 60 Hz, 230 V, 1800 RPM, 215TZ Frame, TEFC

Part #:141437.00
Catalog #:141437.00
Sorry, this item is no longer available

Key Features


  • Extra Hi-Torque designs
  • Rigid base
  • Painted Red
  • Manual Overload protection
  • 1.15 service factor

Key Features


  • Phosphatized or stainless steel shafts drilled and tapped metric shafts
  • Epoxy painted for corrosion protection
  • USDA approved food-safe paint
  • Extra high breakdown torques