1692 results for Pump Motors

Pump Motors

201 - 220 of 1692

Key Features


  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 20:1 Variable Torque and 2:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Check Inventory


Key Features


  • Normal thrust
  • Class F insulation
  • Suitable for 230 volt part winding start through 100 HP (dual voltage motors)
  • Heavy duty lifting lugs
  • Drip cover/canopy cap included

Check Inventory


Key Features


  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Will accept C-Face kits.
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage

Check Inventory


Key Features


  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 20:1 Variable Torque and 2:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Check Inventory


Key Features


  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 20:1 Variable Torque and 2:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Check Inventory


Key Features


  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Inverter Duty 20:1 Variable Torque and 4:1 Constant Torque
  • Nameplated 60/50 hertz, 190/380 volts at next lower HP
  • Steel frame with Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Check Inventory


Key Features


  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 20:1 Variable Torque and 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Check Inventory


Key Features


  • Meets or exceeds NEMA Premium efficiencies
  • High Thrust
  • Weather Protected Type 1 (WP1) enclosure
  • Top angular contact bearings
  • Non-reverse ratchet is standard
  • Couplings of alternative sizes are available through Modification Center
  • Inverter duty 3:1 variable torque with non-reverse ratchet
  • UL Recognized, C-US, and CE Mark

Check Inventory


Key Features


  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Inverter Duty 20:1 Variable Torque and 4:1 Constant Torque
  • Nameplated 60/50 hertz, 190/380 volts at next lower HP
  • Steel frame with Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Check Inventory


Key Features


  • Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
  • Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
  • IP55 enclosure on cast iron frames
  • Inverter Duty 20:1 Variable Torque and 10:1 Constant Torque
  • Class F Insulation
  • Standard F1, reversible to F2 assembly. Dual frame mounting holes.

Check Inventory


Key Features


  • Normal and Medium thrust
  • EPAct and NEMA Premium efficiencies
  • Ball bearings and angular contact bearings for medium thrust applications
  • Class B insulation
  • 1.15 Service Factor
  • Suitable for 230 volt part winding start through 100 HP (dual voltage motors)
  • Heavy duty lifting lugs
  • Drip cover/canopy cap included
  • UL Recognized and CSA Certified
  • UL Listed for Fire Pump applications (except as noted)

Check Inventory


Key Features


  • Meets or exceeds NEMA Premium efficiencies
  • High Thrust
  • Weather Protected Type 1 (WP1) enclosure
  • Top angular contact bearings
  • Non-reverse ratchet is standard
  • Couplings of alternative sizes are available through Modification Center
  • Inverter duty 3:1 variable torque with non-reverse ratchet
  • UL Recognized, C-US, and CE Mark

Check Inventory


Key Features


  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • Red paint exterior
  • NEMA Design B, Code G or less
  • Motor will accept a C-face kit
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower

Check Inventory


Key Features


  • Meets or exceeds NEMA Premium® efficiencies
  • Normal thrust
  • Class F insulation
  • Suitable for 230 volt part winding start through 100 HP (dual voltage motors)
  • Heavy duty lifting lugs
  • Drip cover/canopy cap included

Check Inventory


Key Features


  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Will accept C-Face kits.
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower

Check Inventory


Fire Pump Motor

Part #:444TSTDCDS14013
Catalog #:U1536A

Key Features


  • No features available

Check Inventory


Key Features


  • IP-22 rolled steel, Meets or exceeds NEMA Premium®* efficiencies, NEMA Premium models are in compliance with EISA2007
  • Class F Insulation System, Inverter duty 10:1 variable torque, 1.15 service factor on Sine Wave Power 1.0 SF on Inverter Power
  • Dynamically balanced rotors, Steel conduit box
  • External Slinger
  • Purex Hydrotech East Side "L" Series and "C" Series Commercial Pump
  • Sealed Ball Bearings
  • Keyed Shaft
  • Purex Replacement
  • UL® Recognized & CSA certified and CE® Mark

Check Inventory


Key Features


  • 40°C Ambient
  • Reversible
  • External Slinger
  • Purex Hydrotech East Side "L" Series and "C" Series Commercial Pump
  • Sealed Ball Bearings
  • Keyed Shaft
  • Purex Replacement

Check Inventory


Key Features


  • 3 to 450 horsepower
  • 3600 & 1800 RPM’s; EPAct efficiency
  • Ball bearings; NEMA design B, code G
  • 230/460 and 460 volt motors rated for 50HZ at next lower HP, with 1.15 S.F. on nameplate
  • Dual voltage motors – 12 leads suitable for Y-Delta, low voltage PWS, and across the line start
  • Single voltage motors – 12 leads suitable for Y-Delta, PWS, and across the line start
  • UL listed and CSA certified (UL1004A) and CE marked
  • C-Face kits available through 250HP

Check Inventory


Key Features


  • External slinger
  • Double sealed ball bearings

Check Inventory