Severe Duty Motors

221 - 240 of 904

Compare Product

Severe Duty Motor, 10 & 7.50 HP, 3 Ph, 60 & 50 Hz, 230/460 & 190/380 V, 1200 & 1000 RPM, 256TV Frame, TEAO

Part #:824557.00

Catalog #:824557.00

List Price: $6,497.00

frame_inspect View Details location_on Where to Buy

Key Features

Complete cast iron construction for rigidity and reduced vibration
Epoxy painted; Severe duty treatment of internal parts
Class F insulation; Regreasable bearings
F-1 / F-2 capable; Brass T-drain installed - both ends at 6:00
Inpro shaft seal protected
Shaft grounding ring (SGRs) installed
Inverter rated IRIS® insulation system
10:1 constant and variable torque rated
Designed for shaft up mounting
1.15 S.F. under sine wave power

Check Inventory

Compare Product

Severe Duty Motor, 3 HP, 3 Ph, 60 Hz, 575 V, 1800 RPM, 182T Frame, TENV

Part #:182TTTCD6530

Catalog #:E669A

List Price: $1,671.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
100% cast iron construction for rigidity and reduced vibration
Meets IEEE45 USCG Marine Duty,Meets Ford EM1 Automotive Duty Specification
MAX GUARD® Class H insulation system
IP55 protection
Constant Torque for inverter duty
Sintered bronze breather with brass drain & breather
Bearing caps, Precision balanced to .08”/sec
1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
Internal and external epoxy finish

Check Inventory

Compare Product

Severe Duty Motor, 5 HP, 3 Ph, 60 Hz, 460 V, 1800 RPM, 184T Frame, TEFC

Part #:184TTFCD6526

Catalog #:E617A

List Price: $1,779.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
100% cast iron construction for rigidity and reduced vibration
Meets IEEE45 USCG Marine Duty,Meets Ford EM1 Automotive Duty Specification
MAX GUARD® Class H insulation system
IP55 protection
Constant Torque for inverter duty
Sintered bronze breather with brass drain & breather
Bearing caps, Precision balanced to .08”/sec
1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
Internal and external epoxy finish

Check Inventory

Compare Product

Severe Duty Motor, 5 HP, 3 Ph, 60 Hz, 230/460 V, 1800 RPM, 184TC Frame, TEFC

Part #:184TTFCD6540

Catalog #:E033

List Price: $2,073.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
IP55 enclosure on cast iron frames
Inverter Duty 10:1 Variable Torque and 2:1 Constant Torque
Class F Insulation 40C Max Ambient, 1.0SF on Inveter Power and 1.15SF on Sine Wave Power
Standard F1, reversible to F2 assembly. Dual frame mounting holes.
C-face addition may result in non-NEMA "BA" dim. For new "BA" dim consult chart found in modification section
Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
UL® Recognized & CSA certified and CE® Mark

Check Inventory

Compare Product

Severe Duty Motor, 1 HP, 3 Ph, 60 Hz, 460 V, 900 RPM, 182T Frame, TEFC

Part #:182THFS19101

Catalog #:W504

List Price: $2,830.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets IEEE-841 standard for severe duty applications
C-face addition may result in non-NEMA "BA" dim. For new "BA" dim consult chart found in modification section
Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC
Provisions to add stub shaft for an encoder (182T-449T, TEFC only)
Internal and external epoxy paint
MAX GUARD® Class F insulation system
Constant Torque speed range is listed in Constant Torque speed range is listed in CT SPEED RANGE column

Check Inventory

Compare Product

Severe Duty Motor, 7.50 HP, 3 Ph, 60 Hz, 575 V, 3600 RPM, 213T Frame, TENV

Part #:213THTCD19005

Catalog #:W531A

List Price: $3,100.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets IEEE-841 standard for severe duty motor applications; Meets General Motors® GM® 7E-TA automotive duty specification and Meets IEEE45 USCG marine duty, API RPI4F for offshore platforms
IP-56 cast iron, Meets or exceeds NEMA Premium® efficiencies, NEMA Premium models are in compliance with EISA2007; Actual test and vibration data supplied with each motor
MAX GUARD® Class F Insulation System, Inverter duty 10:1 variable torque and 10:1 constant torque & 1.15 service factor on Sine Wave Power 1.0 SF on Inverter Power
F1/F2 capable, Precision balanced to .08”/sec, Steel conduit box
Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC
NOTE: BCP (-P) models are not Hazardous Duty® motors certified for Division 2 locations, and Hazardous Duty® motors meet division 2 CSA certification when BCP is not employed, nameplate Division 2 / zone 2 class I (gases), groups A, B, C, D Meets temperature code T2B
40°C Ambient 1.15SF Sine Wave Power and 1.0SF inverter power;
Provisions to add stub shaft for an encoder (182-449T, TEFC only, Modifications and Kits are available
UL® Recognized & CSA certified and CE® Mark

Check Inventory

Compare Product

Severe Duty Motor, 7.50 HP, 3 Ph, 60 Hz, 575 V, 1800 RPM, 213T Frame, TEFC

Part #:213TTFCD6530

Catalog #:E671B

List Price: $2,415.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
100% cast iron construction for rigidity and reduced vibration
Meets IEEE45 USCG Marine Duty,Meets Ford EM1 Automotive Duty Specification
MAX GUARD® Class H insulation system
IP55 protection
Constant Torque for inverter duty
Sintered bronze breather with brass drain & breather
Bearing caps, Precision balanced to .08”/sec
1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
Internal and external epoxy finish

Check Inventory

Compare Product

Severe Duty Motor, 2 HP, 3 Ph, 60 Hz, 230/460 V, 1200 RPM, 184T Frame, TENV

Part #:184TTTCD6582

Catalog #:E468A

List Price: $2,079.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
100% cast iron construction for rigidity and reduced vibration
Meets IEEE45 USCG Marine Duty,Meets Ford EM1 Automotive Duty Specification
MAX GUARD® Class H insulation system
IP55 protection
Constant Torque for inverter duty
Sintered bronze breather with brass drain & breather
Bearing caps, Precision balanced to .08”/sec
1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
Internal and external epoxy finish

Check Inventory

Compare Product

Severe Duty Motor, 7.50 HP, 3 Ph, 60 Hz, 460 V, 1800 RPM, 213T Frame, TEFC

Part #:213THFCD9037

Catalog #:W532B-P

List Price: $3,013.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets IEEE-841 standard for severe duty motor applications; Bearing current protection (BCP); Meets General Motors® GM® 7E-TA automotive duty specification and Meets IEEE45 USCG marine duty, API RPI4F for offshore platforms
IP-56 cast iron, Meets or exceeds NEMA Premium® efficiencies, NEMA Premium models are in compliance with EISA2007; Actual test and vibration data supplied with each motor
MAX GUARD® Class F Insulation System, Inverter duty 10:1 variable torque and 10:1 constant torque & 1.15 service factor on Sine Wave Power 1.0 SF on Inverter Power
F1/F2 capable, Precision balanced to .08”/sec, Steel conduit box
Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC
Modifications and Kits are available
40°C Ambient 1.15SF Sine Wave Power and 1.0SF inverter power; NOTE: BCP (-P) models are not Hazardous Duty® motors certified for Division 2 locations
Provisions to add stub shaft for an encoder (182-449T, TEFC only, Modifications and Kits are available
UL® Recognized & CSA certified and CE® Mark

Check Inventory

Compare Product

Severe Duty Motor, 7.50 HP, 3 Ph, 60 Hz, 460 V, 1800 RPM, 213T Frame, TEFC

Part #:213THFCD9026

Catalog #:W532B

List Price: $2,740.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2026
Meets IEEE-841 standard for severe duty applications
100% cast iron construction for rigidity and reduced vibration
Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC
IP56 protection
MAX GUARD® Class H insulation system
Constant torque for inverter duty
Sintered bronze breather with brass drain & breather
Bearing caps, Precision balanced to .08”/sec
1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power

Check Inventory

Compare Product

Severe Duty Motor, 10 HP, 3 Ph, 60 Hz, 230/460 V, 1800 RPM, 215T Frame, TEFC

Part #:215TTFCD16847

Catalog #:E479B-P

List Price: $3,764.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
100% cast iron construction for rigidity and reduced vibration
Meets IEEE45 USCG Marine Duty,Meets Ford EM1 Automotive Duty Specification
MAX GUARD® Class H insulation system
IP55 protection
Constant Torque for inverter duty
Sintered bronze breather with brass drain & breather
Bearing caps, Precision balanced to .08”/sec
1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
Internal and external epoxy finish

Check Inventory

Compare Product

Severe Duty Motor, 10 HP, 3 Ph, 60 Hz, 230/460 V, 1800 RPM, 215T Frame, TEFC

Part #:215TTFCD6527

Catalog #:E479B

List Price: $2,872.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2016
100% cast iron construction for rigidity and reduced vibration
Meets IEEE45 USCG Marine Duty,Meets Ford EM1 Automotive Duty Specification
MAX GUARD® Class H insulation system
IP55 protection
Constant Torque for inverter duty
Sintered bronze breather with brass drain & breather
Bearing caps, Precision balanced to .08”/sec
1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power
Internal and external epoxy finish

Check Inventory

Compare Product

Severe Duty Motor, 10 & 7.50 HP, 3 Ph, 60 & 50 Hz, 230/460 & 190/380 V, 1800 & 1500 RPM, 215T Frame, TEFC

Part #:215TTFCD6546

Catalog #:U870C

List Price: $3,850.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
IP55 enclosure on cast iron frames
Inverter Duty 10:1 Variable Torque and 10:1 Constant Torque
Class F Insulation 40C Max Ambient, 1.0SF on Inveter Power and 1.15SF on Sine Wave Power
Standard F1, reversible to F2 assembly. Dual frame mounting holes.
C-face addition may result in non-NEMA "BA" dim. For new "BA" dim consult chart found in modification section
Hazardous Duty Division 2, Zone 2, Class I, Groups A,B,C,D, Temperature code T2B
UL® Recognized & CSA certified and CE® Mark

Check Inventory

Compare Product

Severe Duty Motor, 7.50 HP, 3 Ph, 60 Hz, 575 V, 3600 RPM, 213T Frame, TENV

Part #:213TTTCD6505

Catalog #:E656B

List Price: $2,659.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
IP55, Severe Duty, 100% cast iron construction for rigidity and reduced vibration Internal and external epoxy paint
Suitable for 10:1 VT and 2:1 CT on VFD, MAX GUARD® Class F insulation system 1.15 Service Factor on sinewave, 1.0 Service Factor on Inverter Power
F1/F2 capable, Precision balanced to .08”/sec, Steel conduit box
Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC
NOTE: BCP (-P) models are not Hazardous Duty® motors certified for Division 2 locations, and Hazardous Duty® motors meet division 2 CSA certification when BCP is not employed, nameplate Division 2 / zone 2 class I (gases), groups A, B, C, D Meets temperature code T2B
40°C Ambient 1.15SF Sine Wave Power and 1.0SF inverter power;
Provisions to add stub shaft for an encoder (182-449T, TEFC only, Modifications and Kits are available
UL® Recognized & CSA certified and CE® Mark

Check Inventory

Compare Product

Severe Duty Motor, 7.50 & 5 HP, 3 Ph, 60 & 50 Hz, 230/460 & 190/380 V, 1800 & 1500 RPM, 213TV Frame, TEAO

Part #:213TTTND16539

Catalog #:U1869A

List Price: $4,315.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiencies
Bearing current protection (BCP)
Blue Chip® quality, 100% cast iron construction for rigidity and reduced vibration
MAX GUARD® Class F insulation system

Check Inventory

Compare Product

Severe Duty Motor, 5 HP, 3 Ph, 60 Hz, 460 V, 1200 RPM, 215T Frame, TEFC

Part #:215THFCD9076

Catalog #:W527B

List Price: $3,067.00

frame_inspect View Details location_on Where to Buy

Key Features

Meets or exceeds NEMA Premium® efficiency. Model is in compliance with EISA2007
Meets IEEE-841 standard for severe duty applications
100% cast iron construction for rigidity and reduced vibration
Inpro/Seal® VBX® bearing isolators on drive end shaft extension TENV and on both ends of TEFC
IP56 protection
MAX GUARD® Class H insulation system
Constant torque for inverter duty
Sintered bronze breather with brass drain & breather
Bearing caps, Precision balanced to .08”/sec
1.15 Service Factor on sinewave, 1.0 Service Factor on IGBT power