AboutContactCareers
359 results for Fire Pump Motors

Fire Pump Motors

21 - 40 of 359

Fire Pump Motor, 150 & 125 HP, 3 Ph, 60 & 50 Hz, 460 & 380 V, 3600 & 3000 RPM, 405TS Frame, DP

Part #:405TSTDCD14306
Catalog #:U534B

List Price: $27,958.00

frame_inspect View Details location_on Where to Buy

Key Features

  • IP22, NEMA® EPACT Efficiency, Fire Pump motors are not recommended for use with variable frequency drives.
  • NEMA® design B, code G or less, 230/460 and 460 volt motors rated for 50HZ at next lower HP, with 1.15 S.F. on nameplate
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Class F Insulation, 50C Max Ambient, 1.15 service factor (except as noted)
  • Red paint on 25 HP through 250 HP
  • Ball bearings
  • Will accept C-Face kits (except as noted), see accessories section for kits
  • UL file EX5190, CSA file LR2025 and CE mark
  • Will become build-up item when current stock is gone

Check Inventory

Fire Pump Motor, 125 HP, 3 Ph, 50 Hz, 415 V, 1500 RPM, 405TS Frame, DP

Fire Pump Motor, 125 HP, 3 Ph, 50 Hz, 415 V, 1500 RPM, 405TS Frame, DP

Part #:405TSTDCD4029
Catalog #:U1432

List Price: $24,447.00

frame_inspect View Details location_on Where to Buy

Key Features

  • IP-22 cast iron, Meets or exceeds NEMA Premium®* efficiencies, NEMA Premium models are in compliance with EISA2007
  • Class F Insulation System, NEMA® design B, code G or less
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Red paint, Bearing Caps both ends, Grease Fittings with pipe plugs, Modifications and Kits are available
  • 50°C Ambient, 1.15SF Sine Wave Power Only
  • UL file EX5190, CSA file LR2025 and CE mark

Check Inventory

Fire Pump Motor, 250 & 200 HP, 3 Ph, 60 & 50 Hz, 460 & 380 V, 3600 & 3000 RPM, 449TS Frame, TEFC

Part #:449TSTFS14012
Catalog #:Y1640

List Price: $51,205.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Red paint exterior
  • NEMA Design B, Code G or less
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Will accept C- Face kits.
  • 230/460 and 460 Volt models rated for 50 HZ at next lower HP
  • For special designs, contact district sales office near you

Check Inventory

Fire Pump Motor, 300 & 250 HP, 3 Ph, 60 & 50 Hz, 460 & 380 V, 3600 & 3000 RPM, 447TS Frame, DP

Part #:447TSTDCD4002
Catalog #:U541

List Price: $41,816.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • NEMA Design B, Code G or less
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Red paint

Check Inventory

Fire Pump Motor, 125 HP, 3 Ph, 60 Hz, 575 V, 3600 RPM, 404TS Frame, DP

Fire Pump Motor, 125 HP, 3 Ph, 60 Hz, 575 V, 3600 RPM, 404TS Frame, DP

Part #:404TSTDCD4002
Catalog #:U1121A

List Price: $19,989.00

frame_inspect View Details location_on Where to Buy

Key Features

  • IP-22 cast iron, Meets or exceeds NEMA Premium®* efficiencies, NEMA Premium models are in compliance with EISA2007
  • Class F Insulation System, NEMA® design B, code G or less
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Red paint, Bearing Caps both ends, Grease Fittings with pipe plugs, Modifications and Kits are available
  • 50°C Ambient, 1.15SF Sine Wave Power Only
  • UL file EX5190, CSA file LR2025 and CE mark

Check Inventory

Fire Pump Motor, 100 HP, 3 Ph, 50 Hz, 415 V, 1500 RPM, 404TS Frame, DP

Fire Pump Motor, 100 HP, 3 Ph, 50 Hz, 415 V, 1500 RPM, 404TS Frame, DP

Part #:404TSTDCD4029
Catalog #:U1428

List Price: $16,929.00

frame_inspect View Details location_on Where to Buy

Key Features

  • IP-22 cast iron, Meets or exceeds NEMA Premium®* efficiencies, NEMA Premium models are in compliance with EISA2007
  • Class F Insulation System, NEMA® design B, code G or less
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Red paint, Bearing Caps both ends, Grease Fittings with pipe plugs, Modifications and Kits are available
  • 50°C Ambient, 1.15SF Sine Wave Power Only
  • UL file EX5190, CSA file LR2025 and CE mark

Check Inventory

Fire Pump Motor, 125 HP, 3 Ph, 60 Hz, 200/400 V, 3600 RPM, 404TS Frame, DP

Part #:404TSTDS14008
Catalog #:U531

List Price: $21,481.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Will accept C-Face kits.
  • Will become build-up item when current stock is gone

Check Inventory

Fire Pump Motor, 250 & 200 HP, 3 Ph, 60 & 50 Hz, 460 & 380 V, 1800 & 1500 RPM, 445TS Frame, DP

Part #:445TSTDCD14027
Catalog #:U540B

List Price: $34,085.00

frame_inspect View Details location_on Where to Buy

Key Features

  • IP22, NEMA® EPACT Efficiency, Fire Pump motors are not recommended for use with variable frequency drives.
  • NEMA® design B, code G or less
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Class F Insulation, 50C Max Ambient, 1.15 service factor (except as noted)
  • Red paint
  • Ball bearings
  • Will accept C-Face kits (except as noted), see accessories section for kits
  • UL file EX5190, CSA file LR2025 and CE mark

Check Inventory

Fire Pump Motor, 25 HP, 3 Ph, 60 Hz, 190/380-400 V, 3600 RPM, 256T Frame, DP

Part #:256TTDBD4020
Catalog #:U501A

List Price: $4,714.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Will accept C-Face kits.
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage

Check Inventory

Fire Pump Motor, 15 HP, 3 Ph, 60 Hz, 230/460 V, 3600 RPM, 254T Frame, TEFC

Part #:254TTFPA14014
Catalog #:Y1608

List Price: $5,798.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • Red paint exterior
  • NEMA Design B, Code G or less
  • Motor will accept a C-face kit
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower

Check Inventory

Fire Pump Motor, 25 & 20 HP, 3 Ph, 60 & 50 Hz, 230/460 & 190/380 V, 1800 & 1500 RPM, 284T Frame, TEFC

Part #:284TTFPA14055
Catalog #:Y1613

List Price: $5,569.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • Red paint exterior
  • NEMA Design B, Code G or less
  • Motor will accept a C-face kit
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower

Check Inventory

Fire Pump Motor, 30 HP, 3 Ph, 60 Hz, 190/380-400 V, 3600 RPM, 284TS Frame, DP

Part #:284TSTDBD4007
Catalog #:U1053

List Price: $5,160.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Will accept C-Face kits.
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage

Check Inventory

Fire Pump Motor, 30 HP, 3 Ph, 60 Hz, 190/380-400 V, 1800 RPM, 286T Frame, DP

Part #:286TTDBD14042
Catalog #:U1054

List Price: $4,983.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Will accept C-Face kits.
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage

Check Inventory

Fire Pump Motor, 50 HP, 3 Ph, 60 Hz, 190/380-400 V, 3600 RPM, 324TS Frame, DP

Part #:324TSTDCD4007
Catalog #:U513A

List Price: $7,537.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Will accept C-Face kits.
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage

Check Inventory

Fire Pump Motor, 50 HP, 3 Ph, 60 Hz, 190/380-400 V, 1800 RPM, 326T Frame, DP

Part #:326TTDCD4344
Catalog #:U515A

List Price: $8,089.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Will accept C-Face kits.
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage

Check Inventory

Fire Pump Motor, 60 HP, 3 Ph, 60 Hz, 190/380-400 V, 3600 RPM, 326TS Frame, DP

Part #:326TSTDCD4022
Catalog #:U517A

List Price: $7,765.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Will accept C-Face kits.
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage

Check Inventory

Fire Pump Motor, 60 & 50 HP, 3 Ph, 60 & 50 Hz, 230/460 & 190/380 V, 1800 & 1500 RPM, 364T Frame, TEFC

Part #:364TTFS14064
Catalog #:Y1624

List Price: $18,616.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • Red paint exterior
  • NEMA Design B, Code G or less
  • Motor will accept a C-face kit
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower

Check Inventory

Fire Pump Motor, 150 & 125 HP, 3 Ph, 60 & 50 Hz, 460 & 380-400 V, 1800 & 1500 RPM, 444TS Frame, DP

Part #:444TSTDCD4332
Catalog #:U535A

List Price: $21,268.00

frame_inspect View Details location_on Where to Buy

Key Features

  • Designed for use on pumps for fire pump duty
  • UL file EX5190, CSA file LR2025 and CE mark
  • 50°C ambient
  • Red paint on 25 HP through 200 HP
  • NEMA Design B, Code G or less
  • Will accept C-Face kits.
  • Single voltage motors have 12 leads and are suitable for wye-delta, across the line, or part winding start
  • Dual voltage motors have 12 leads, suitable for wye-delta or across the line start on either voltage, or part winding start on low voltage
  • Rated 60/50 hertz, 190/380 or 380 volt at next lower horsepower

Check Inventory

Fire Pump Motor

Part #:444TSTDCDS14013
Catalog #:U1536A
frame_inspect View Details location_on Where to Buy

Key Features

  • No features available

Check Inventory

Fire Pump Motor, 40 & 30 HP, 3 Ph, 60 & 50 Hz, 230/460 & 190/380 V, 3600 & 3000 RPM, 324TS Frame, TEFC

Part #:LM80085
Catalog #:LM80085

List Price: $9,326.00

frame_inspect View Details location_on Where to Buy

Key Features

  • 3 to 450 horsepower
  • 3600 & 1800 RPM’s; EPAct efficiency
  • Ball bearings; NEMA design B, code G
  • 230/460 and 460 volt motors rated for 50HZ at next lower HP, with 1.15 S.F. on nameplate
  • Dual voltage motors – 12 leads suitable for Y-Delta, low voltage PWS, and across the line start
  • Single voltage motors – 12 leads suitable for Y-Delta, PWS, and across the line start
  • UL listed and CSA certified (UL1004A) and CE marked
  • C-Face kits available through 250HP

Check Inventory

« 1 2 3 »